A zumimall doorbell is a video doorbell designed to help you monitor your smart home while you are away.
It is a smart doorbell that records the events and footage that happened at your front door so you can watch it from anywhere you are.
Upgraded to 2k 3mp in the second half of 2022, the video doorbell can provide you with the best home security.
From live video coverage to 2-way talk, motion detection, night vision, cloud storage, easy to install, and many more. There is no reason not to have this wireless security doorbell.
You can buy the doorbell on Amazon
Components of a zumimall video bell kit
It comprises:
- 1 Wifi video doorbell camera
- 1 receiver or wireless chime
- An in-built rechargeable battery
Reasons we recommend zumimall wireless doorbell.
2K FHD & Stunning Night Vision
Unlike other smart bells like ring video doorbell and skybell that has a resolution of 720 p, zumimall was updated in the second half of 2022 with the resolution upgraded to 2k 3mp.
Greater resolution means greater video quality and better day or night vision. The doorbell camera also has 145 ° wide angle view, which is enough to capture everywhere in front of your house.
Wireless doorbell with an inbuilt battery
Zumimall video bell is 100% wire-free, and does not require any wiring. It is also powered by a built-in rechargeable battery which you can install anywhere in your house.
The battery can last for about 2 – 5 months, no need for frequent charging.
You can check your battery status anytime from your Zumimall app.
Dual storage option
While other doorbells store recorded videos in the cloud, zunimall stores both in the cloud and on a micro SD card. Storing the videos on the memory card will save you some dollars you would have used on a cloud subscription.
IP66 Waterproof protection
This wireless security doorbell has an IP66 Waterproof design. The protection makes the bell suitable for indoor and outdoor surveillance.
Two-way audio and voice messages
This doorbell can provide you with real-time clear two-way audio with built-in microphone and speaker to allow you to speak with your visitor before opening the door.
It also allows you to record and send a 30 second voice message for a quick reply when you are not available to talk.
Motion detection
The doorbell camera records video each time motion is detected at your front door and sends instant signal to your smart phone anywhere in the world to enable you to stop the crime before it happens.
It has a PIR sensor that supports body detection only. This means it only detects and captures human motion even without the visitor pressing the doorbell button.
Easy to install
The security camera is wireless and does not need a wire to work. You only mount the camera/push button at the front door and the chime anywhere in the house.
Tamper Alarm
If somebody tries to remove the doorbell camera, a video alarm will be activated and equally sent to your phone. No need to worry about the camera being stolen.
50 DB Siren
Zumimall camera comes with a siren alarm which can activate automatically or manually when motion is captured at your front door, to warn off the intruder.
How to install a zumimall doorbell camera
To install the camera and push button, follow these steps:
locate a suitable place at your front door or wall.
make pilot holes with the help of drill bits.
Use the provided washers and screws to secure the doorbell firmly in a place.
connect the doorbell to the zumimall app and start monitoring your home.
App installation and setup
After installing the transmitter (push button) and chime, move on to the Google Play Store and download the CloudEdge App into your smartphone.
Allow the app to use mobile data and a local wireless area network (LAN) to add an IP camera. Allow it to receive push message alerts so that it will alert your phone whenever it detects motion.
New users to CloudEdge App should register to be eligible to use the app.
After the installation, insert the micro SD card into the security camera before powering it on. This is to ensure it detects the memory card.
Wi-Fi setup
Before you start the Wi-Fi setup, note:
- The doorbell works with 2.4 GHz Wi-Fi and not with 5 GHz.
- Avoid using symbols like)(@~!#�% ^&*…, in your Wi-Fi name or password.
- Try the configuration near your Wi-Fi router.
Open the CloudEdge app and register an account with your phone number and email. Then follow these steps:
- Tap on the “+” icon to add a device
- select the doorbell
- Check the power status
- Reset the doorbell
- Activate the doorbell
- Input Wi-Fi password
- Generate and scan the QR code
- Wait for the Wi-Fi connection.
Once successful, tap the live view window in the app to test it.
Related articles
FAQ
how do I share zumimall doorbell camera with friends?
Zumimall doorbell camera helps you monitor and record footage of visitors in your home.
If you want to share the camera with others, begin by creating an account and adding them as friends. Once you add them, they will view the records and images.
Does Zumimall Doorbell support 5GHz Wi-Fi?
Yes, zumimall support 5GHz Wi-Fi network. This is great, as it enables a speedy connection.
How do I connect my Zumimall Doorbell to Wi-Fi?
You can connect to Wi-Fi from the doorbell settings menu. Select the Wi-Fi option, enter your password and press the connect button.
Related article
Doorbell Wiring Diagrams: How to install a Transformer, Chime, and Push Button
Physen Doorbell overview, The Installation Guide and How to pair the Bell Chime
How to Test a Doorbell Transformer Voltage with a Multimeter